Solar Cell & Junction Box Connection Instruction |
Ò»£ºIllustration Diagram |
|
¡¡¡¡The above shown is a typical connection diagram of the junction box with solar cell modular. There is no current flowing through the diode when solar cell is generating the power, and the diode is at around 1.7V reverse biased. In case the malfunction of any cell unit and no power is generated, the diode in parallel with will bypass the current generated from other cells. |
¶þ¡¢Junction Box Types£º |
¡¡¡¡Junction Box Type: Silicon and Amorphous Silicon Junction Box, Wall-Mounted Junction Box, explosion-proof Junction Box |
Èý¡¢Construction of Junction Box£º |
¡¡¡¡Housing, Cable, Connectors |
a.Construction of Housing£º |
¡¡¡¡Plastic box, upper cover, diodes. |
b.Cable Types£º |
¡¡¡¡Typical cable types: 1.5MM2¡¢2.5MM2¡¢4MM2. |
c.Connector Types: |
¡¡¡¡Type MC3 and MC4 are commonly used as shown below. |
|
ËÄ¡¢Diode Spec£º |
¡¡¡¡Schottky diode isrequired for Solar Cell Junction Box application. |
¡¡¡¡40V¡¢45V¡¢50V¡¢60V¡¢80V¡¢100V¡£Typical current ratings: 10A¡¢12A¡¢15A£»Typical max. reverse voltage ratings: 40V¡¢45V¡¢50V¡¢60V¡¢80V¡¢100V |
Îå¡¢Typical Junction Box for Solar Cell Modular |
|
Áù¡¢Technical Specifications |
¡ôApplicable Power Rating: 5W to 280W |
¡ôMax. Reverse Voltage 1000V |
¡ôRated Current: 6A to 16A (Other current ratings available upon customer request) |
¡ôContact Resistance <55m¦¸ |
¡ôIP Protection: IP65 |
¡ôSafety Class: Class ¢ò |
¡ôOperating Temperature: -40+85¡æ |
¡ôHousing Material: PPO (Long lifetime, resistant to ultraviolet radiation, applicable for the applications under tough environments. |
¡ôConnection Cable Types£º1.5MM2¡¢2.5MM2¡¢4MM2¼°6MM2 |
Æß¡¢Ordering Code£º |
|